DIRECTIONS FOR USE PAINT PUMP MACHINE:
However, the use and maintenance of the PRONA pump machine is not always known to increase longevity and prevent the pump from suffocating.
First, adjust the compressed air pressure slightly for the machine, preferably between 3kg and 3.5kg. If you give too much pressure can cause “tear membrane pump” in the paint pump housing makes The pump is weak due to the “dam” not having enough chemical flow capacity
Secondly, after use, you have to clean the pump with gasoline pump or solvent to clean the pump tube, avoid the situation of lacquering can cause clogged pipe also cause the pump is weak, not enough capacity
Third, do not allow the machine to break when not to paint, but it must be connected to the paint chemistry because it can easily cause tear film, this is the most likely to cause tearing the pump diaphragm and replacement parts
You can find PRONA pump machine and pump equipment for the best support and advice.
Công Ty TNHH VIET-SING TECH
Văn phòng: 216, Đường D16, Khu dân cư Việt -Sing, P. An Phú, TX. Thuận An, Bình Dương.
Web : https://vietsingtechvn.com
Tel : (0274) 3713 558 – 3713 908 Fax : (84 274) 3713 088